What is a Leak Detection Technician training program?
The training program in leak detection prepares people for a technical job: finding where and why a fluid, such as gas, oil or oil-based products, is escaping from a pipe, a tank or an installation. In the pipeline and terminal sector, a leak detection technician looks for small losses before they grow, to protect people, the environment and the installation.
A typical day starts by reviewing the work plan and the permits for the day, and checking that the measuring equipment is calibrated and the batteries are charged. Then the technician goes out into the field, sometimes along a pipeline route, to a valve station or to a terminal, and walks through inspection points with portable detectors. On returning, the data is downloaded and compared with earlier readings, what was found is written down, and the maintenance or operations team is told if something needs attention. Part of the work is outdoors in any weather, and part is in an office.
Typical tasks
- Walking along pipes, valves, flanges and tanks with gas or vapor detectors to locate possible losses.
- Checking readings from sensors and from pressure and flow monitoring systems, and noticing changes that are not normal.
- Using equipment such as acoustic detectors, thermal or gas imaging cameras and tracers to pinpoint the exact spot of a leak.
- Checking and calibrating measuring instruments according to company procedures.
- Recording each finding with its location, date, reading and photographs, and writing reports for operations and maintenance.
- Following work permits, safety rules and the use of personal protective equipment in areas with flammable gases or liquids.
- Checking, after a repair, that the leak has been fixed.
Subjects and content usually covered
- Basic math and physics: pressure, flow, temperature and the properties of gases and liquids.
- Technical drawing and reading pipe plans and isometric drawings.
- Materials and parts of a pipeline system: pipes, valves, flanges, gaskets and welds.
- Instrumentation and measurement: sensors, pressure gauges, flow meters and calibration.
- Detection methods: pressure tests, acoustic testing, thermal imaging and gas detection.
- Corrosion and its causes, and the basics of protection against it.
- Industrial safety, explosive atmospheres, work permits and emergency response.
- Basic computing, spreadsheets and writing technical reports.
Usual duration and type of training
Technical training usually lasts between 1 and 3 years, depending on the country and the program, and may be in mechanics, instrumentation, industrial maintenance or process operations. It is also common to learn the trade through short courses, lasting from a few weeks to a few months, on gas detection, safety in hazardous spaces or non-destructive testing, combined with supervised practice at a company. The names of the programs, and what each one qualifies a person to do, vary from one country to another.
How you get there and what is usually required to practice
A common path is to complete a technical program at secondary or post-secondary level in maintenance, instrumentation, mechanics or industrial processes, and join a company in the sector as an assistant or junior technician. Another path is to start in the maintenance or operation of pipelines and terminals and move into this role with in-house training.
To work at oil and gas installations, safety courses, training in working at height or in confined spaces, and first aid are usually required, along with medical exams. In many countries, certain tests and measurements are done with certifications specific to the method. The exact requirements depend on the country and on each company. People under 18 cannot work in these areas, so the role is normally reached after finishing the training.
Skills that help
- Looking closely at the details of an installation and noticing what has changed since a previous visit.
- Handling measuring instruments with care and following the steps for calibrating and using them.
- Reading plans, diagrams and readings to decide where to look first.
- Writing down data accurately and drafting reports that other people can understand.
- Following safety procedures consistently, even when the task is repetitive.
- Communicating clearly with operations, maintenance and supervisors, especially when a finding is urgent.
Career paths and job opportunities
- Companies that operate oil and gas pipelines.
- Storage and dispatch terminals for fuels.
- Gas processing plants and refineries.
- Natural gas distribution networks for cities and industry.
- Contractor companies for pipeline inspection, testing and maintenance.
- Compressor and pumping stations.
What you are not always told
- Much of the work is outdoors, in heat, cold, rain or difficult terrain, and sometimes in places far from cities.
- There are long days, rotating shifts and on-call duty, and a leak alert can mean going out outside normal hours.
- Many inspections are repetitive and most of the time nothing is found; attention has to stay just as sharp.
- The work takes place near flammable or toxic substances, so safety rules are strict and allow no shortcuts.
- The first job is usually the hardest to get, because companies value experience and safety courses.
How the field is changing
Continuous monitoring systems, with sensors along the pipelines, detect changes in pressure or flow and point to suspicious zones before anyone goes out into the field. Drones, thermal and gas imaging cameras, and software that analyzes data to tell a real leak from a false alarm are being added. This reduces some of the walking inspections and increases the work with data and electronic equipment. At the same time, environmental and safety rules tend to become stricter about emissions and gas losses.
Want to know if this is the right career for you?
Take the free vocational test with 5 scientific methods — CHASIDE, Holland, Big Five, MMMG and VAK — to get your personalized profile. You can also explore all university careers or learn about the scientific methodology.