What is the job of an Analog Design Engineer?
The job of an analog design engineer consists of designing electronic circuits that handle continuous signals, meaning signals that can take any value within a range, such as the voltage produced by a microphone, a temperature sensor or an antenna. These circuits are used to build amplifiers, filters, voltage regulators, converters between analog and digital signals, and oscillators. The work is almost always done inside a chip (an integrated circuit) or on an electronic board that is part of a larger product.
A typical day combines desk work and lab work. In the morning, someone might review a specification, for example how much noise a circuit can tolerate or how much power it may use, and adjust the schematic in a simulation program. Afterward, results are analyzed, changes are discussed with the digital design, chip layout or testing teams, and decisions are documented. When a prototype exists, it is measured with instruments such as oscilloscopes and power supplies to compare what is measured with what was simulated.
Typical tasks
- Interpreting a product's specifications and turning them into circuit requirements, such as gain, noise, power use and speed.
- Proposing a circuit architecture and drawing the schematic with transistors and other components.
- Simulating how the circuit behaves under variations in temperature, voltage and manufacturing.
- Reviewing with the layout team how components are placed, because the arrangement affects noise and performance.
- Measuring prototypes in the lab and comparing the results with the simulations.
- Looking for the cause of failures or deviations and proposing corrections to the design.
- Writing technical documentation and presenting progress to other teams.
Subjects and content usually covered
- Analysis of electric and electronic circuits, with resistors, capacitors, inductors and transistors.
- Semiconductor physics and how devices such as diodes and transistors work.
- Signals and systems, with analysis in time and in frequency.
- Amplifiers and analog electronics, including operational amplifiers and noise.
- Control theory and the stability of circuits with feedback.
- Digital electronics and converters between analog and digital signals.
- Circuit simulation programs and the basics of programming to automate analysis.
- Mathematics: calculus, linear algebra, differential equations and probability.
Usual duration and type of training
This is not a degree with that name but a job people reach after studying a related engineering field. The university degree usually takes 4 to 6 years, depending on the country and the institution. Many people add a graduate program, such as a master's degree of 1 to 3 years or a doctorate, especially to design integrated circuits. Learning also continues on the job for several years, alongside more experienced colleagues. The length and the names of the qualifications vary from country to country.
How you get there and what is usually required to practice
The most common route is to study electronic engineering, electrical engineering, telecommunications engineering or a closely related degree, and to choose courses in analog electronics and integrated circuits. Some people arrive from physics or from biomedical engineering, with additional training in electronics. Internships in a lab or at a company and a final project on circuits often help in getting started.
In most countries no professional license is required to design circuits, although in some the engineering degree does have an official registration. For chip design jobs a graduate degree is often asked for. It is worth knowing that the first job can be hard to get, because in some countries there are few positions of this kind and they are often concentrated in a small number of cities.
Skills that help
- Reasoning with circuits: picturing how currents and voltages flow and anticipating what will happen when a component is changed.
- Using simulation and schematic design programs, and reading their results carefully.
- Measuring with lab instruments and checking whether the results make sense.
- Tracing the cause of a problem step by step, ruling out hypotheses.
- Reading datasheets and technical documentation, often in English.
- Explaining technical decisions in writing and in meetings with other teams.
Career paths and job opportunities
- Companies that design and manufacture integrated circuits.
- Manufacturers of telecommunications and networking equipment.
- The automotive industry, in sensors and in the vehicle's electronic systems.
- Makers of medical devices, such as monitors and diagnostic equipment.
- Consumer electronics, audio and instrumentation companies.
- Research centers and university laboratories.
What you are not always told
- Much of the work is slow and meticulous: a small change in a circuit can require days of simulation and review.
- A mistake in a manufactured chip can be very costly to fix, so designs are checked several times and the pressure not to make errors is real.
- A large part of the time is spent in front of a screen and in technical meetings, in addition to the lab.
- The first job can be hard to get, and sometimes it means moving to another city or country.
- Learning goes on for years: mastering noise, manufacturing variations and other real-world effects takes time and practice.
How the field is changing
Simulation and computer-aided design tools are becoming more powerful, and some repetitive tasks, such as trying many combinations of values, are being automated. Analog circuits are increasingly integrated with digital parts inside the same chip, so people who design them need to understand both worlds. Low power use, small sensors and connected devices are also gaining weight, along with stricter quality and safety requirements in areas such as automotive and medical equipment.
Want to know if this is the right career for you?
Take the free vocational test with 5 scientific methods — CHASIDE, Holland, Big Five, MMMG and VAK — to get your personalized profile. You can also explore all university careers or learn about the scientific methodology.