What is the Plasterer trade?
The trade of plasterer consists of covering and shaping walls and ceilings with plaster, a mineral paste that is mixed with water and applied while it is still soft. The aim is to leave surfaces smooth, even and ready to paint or cover with another finish. The work can also include moldings, cornices and other decorative details made with the same material.
A typical day starts by checking the site and preparing the surface to be covered: the floor is protected, the wall is cleaned and level guides are marked. Then the plaster is mixed, applied with a trowel and a straightedge, smoothed, and left to dry so that flaws can be corrected. The work is done standing up, with the arms raised for a good part of the time, sometimes on scaffolding or ladders, and almost always in coordination with bricklayers, electricians and painters.
Typical tasks
- Preparing surfaces by cleaning, dampening or repairing cracks before the plaster goes on.
- Mixing plaster with water in the right proportion until the paste is even.
- Applying plaster to walls and ceilings with a trowel, a straightedge and other hand tools.
- Smoothing and leveling the surface until it is flat and free of waves.
- Fitting guides, corner beads and reinforcements so that corners and edges come out straight.
- Making moldings, cornices and ceiling roses, either in place or with molds.
- Repairing areas damaged by moisture, knocks or installations, and cleaning up the area when finished.
Subjects and content usually covered
- Properties of plaster and of other coating materials, such as lime and cement.
- Preparing mixes and drying times.
- Techniques for applying, leveling and smoothing with a trowel and a straightedge.
- Basic plan reading and measuring of surfaces.
- Calculating the amount of material needed for each job.
- Moldings and decorative work in plaster.
- Safety on site: working at height, using eye and breathing protection, and handling dust.
Usual duration and type of training
There is no single length, because it varies a lot by country and by route. Training courses in plastering or wall finishes usually last 3 to 12 months, and technical programs in construction or finishing work take 1 to 3 years. Many people learn the trade by working as helpers alongside an experienced person, for several months or years, until they master the finer finishes.
How you get there and what is usually required to practice
People can get there through technical training or a construction trades course, or by starting as a helper in a crew and learning on site. In many countries helpers prepare mixes, move materials and cover simple areas before taking charge of the finishes.
In general no professional license is required to practice, although some companies, large building sites or public programs ask for trade certificates or courses in working at height. People who work for themselves often add some knowledge of pricing jobs and dealing with clients.
Skills that help
- A steady hand to move the trowel in even strokes and leave smooth surfaces.
- A sharp eye for spotting uneven areas, waves and marks before the plaster hardens.
- Simple calculation of surfaces and amounts of material.
- Managing the working time of plaster, which starts to set soon after it is mixed.
- Physical stamina to work with the arms raised and to carry sacks and tools.
- Coordinating with the other trades working on the same site.
Career paths and job opportunities
- New housing construction sites, in houses and apartment buildings.
- Renovations and remodeling of houses and apartments.
- Restoration of old buildings, where moldings are repaired and reproduced.
- Shops, offices and hotels.
- Construction and finishing companies, as part of a crew.
- Self-employed work, serving different clients.
What you are not always told
- The work is physically demanding: a lot of time is spent standing, with the arms up and carrying weight, and over the years it can affect the shoulders, back and knees.
- Plaster dust irritates the eyes and airways, so personal protection is part of the daily work.
- The result is visible and judged: a badly smoothed wall shows up in the light, and correcting it takes extra time.
- On site, the pace depends on other trades and on the weather. There can be days of waiting and days of great rush.
- At the start there are usually several months as a helper, with repetitive tasks, before taking charge of the fine finishes.
How the field is changing
Besides plaster applied by hand, there are prefabricated plasterboard panels and dry construction systems, and on some sites the work resembles installing and finishing joints. There are also premixed plasters and spraying machines that reduce hand mixing and allow large surfaces to be covered more quickly. Restoration and decorative work still call for hand technique. Rules on dust and work at height also influence how a site is organized and what protection is used.
Want to know if this is the right career for you?
Take the free vocational test with 5 scientific methods — CHASIDE, Holland, Big Five, MMMG and VAK — to get your personalized profile. You can also explore all university careers or learn about the scientific methodology.