What is the Tiler trade?
The trade of tiler consists of covering floors, walls, bathrooms, kitchens, terraces and other surfaces with ceramic tiles, porcelain tiles or similar coverings. The purpose is for the surface to end up firm, level, easy to clean and resistant to moisture and daily wear, as well as having a neat finish that looks good.
A typical day starts by checking the surface to be worked on: whether it is clean, firm and level. Then the measurements are taken, the starting point is marked and the adhesive is prepared. After that the tiles are set one by one, those that have to fit around corners, drains or fixtures are cut, the alignment is checked with a level and spacers and, at the end, the joints are filled and everything is cleaned. It is manual work, done standing or kneeling, in new buildings and in renovations.
Typical tasks
- Measuring rooms and calculating how many tiles, how much adhesive and how much grout are needed.
- Checking and preparing the base, correcting uneven areas with a layer of mortar or a leveling compound when needed.
- Drawing reference lines and deciding where to start so that the layout ends up centered and the cut tiles are balanced.
- Applying the adhesive and setting the tiles while keeping an eye on the level, the spacing between them and the pattern.
- Cutting tiles with manual or electric cutters to go around corners, pipes and edges.
- Filling the joints, cleaning off leftover material and checking the final result.
- Removing old coverings in renovations and explaining drying times to the client or the person in charge of the site.
Subjects and content usually covered
- Reading measurements, simple plans and sketches of the space.
- Calculating surface areas and the amount of material needed.
- Types of ceramic tiles, porcelain tiles, wall tiles and mosaics, and what each one is used for.
- Adhesives, mortars and grout, and how they are prepared and applied.
- Preparing bases: leveling, cleaning and waterproofing wet areas.
- Use and upkeep of manual and electric cutting and setting tools.
- Safety rules on a building site and protecting the back, knees and airways.
Usual duration and type of training
There is no single route and no fixed length, and it varies a lot from one country to another. Training courses in tiling usually last from 2 to 12 months. Some technical schools or construction programs include the trade within a program of 1 to 3 years. Many people also learn by working as helpers alongside an experienced tiler, for a period that can range from 1 to 3 years before they work on their own. Courses are usually in person and hands-on, because the trade is learned mostly with the hands.
How you get there and what is usually required to practice
The most common way in is to start as a helper in a building crew or with an independent tiler: people learn to mix materials, move supplies, clean up and, little by little, to set tiles and make cuts. Another route is training courses at vocational training centers, technical schools or trade programs, which combine explanation and practice.
In general a university degree or a professional license is not required to work, although in some countries there are skills certifications that certain companies or tenders may ask for. People who work for themselves usually also have to handle quoting prices, buying materials, coordinating with other trades and following their country's rules on registering their activity.
Skills that help
- Measuring and marking accurately so that lines and cuts come out straight.
- Keeping each tile level and aligned across a large surface.
- Making clean cuts with manual and electric tools.
- Calculating amounts of material so as not to run short or waste too much.
- Solving problems on site, such as crooked walls, uneven floors or tiles of slightly different shades.
- Working in a tidy, clean way and coordinating with other trades such as plumbing, masonry or painting.
Career paths and job opportunities
- Building sites for homes, apartment buildings and commercial premises.
- Remodeling companies that renovate bathrooms and kitchens.
- Independent crews that work on contract in private homes.
- Construction companies that have their own finishing teams.
- Hotels, hospitals, schools and other buildings that need upkeep of floors and walls.
- Building supply stores that offer an installation service.
What you are not always told
- It is physical work: many hours are spent on the knees, bent over or carrying heavy boxes, and over time aches in the back, knees and wrists can appear.
- Cutting tiles raises fine dust, so breathing, eye and ear protection is needed.
- Mistakes show: a tile set badly or a crooked joint is hard to fix once the adhesive has dried.
- The work depends on other trades and on the schedule of the site, so there are sometimes waits or tight deadlines.
- People who work for themselves can have periods with more and with fewer jobs, and have to look after their own tools and organization.
How the field is changing
Large-format tiles, thin porcelain tiles and coverings that imitate wood or stone have gained ground, and they call for more care when cutting them, moving them and getting them perfectly flat. There are also adhesives and grouts with new formulations, leveling systems with spacers and wedges, and more precise electric tools with better dust control. More attention is also being paid to waterproofing in wet areas and to the safety and health of the people who work on site.
Want to know if this is the right career for you?
Take the free vocational test with 5 scientific methods — CHASIDE, Holland, Big Five, MMMG and VAK — to get your personalized profile. You can also explore all university careers or learn about the scientific methodology.