What is the job of a Quality Control Inspector?
The job of a quality control inspector in construction consists of checking that what is being built matches what the plans, the technical specifications and the applicable standards say. The inspector reviews materials, processes and finished work, and records whether they comply or not. The purpose is to catch defects in time, so that they are corrected before they turn into a bigger problem or a risk for the people who will use the building.
A typical day starts with a review of the plans and of the day's inspection plan. Then the inspector walks the site wearing a hard hat, boots and a safety vest: dimensions are measured, the steel reinforcement is checked before concrete is poured, samples are taken, welds, finishes or installations are checked and what is observed is photographed. At the end, the inspection forms are completed, non-conformities are reported to the supervisor or to whoever runs the site, and follow-up is done on whatever is still waiting to be corrected.
Typical tasks
- Reviewing plans, specifications and quality plans before inspecting each activity.
- Verifying that the materials arriving at the site match what was ordered and come with their certificates.
- Measuring and checking levels, dimensions, concrete cover and alignments with measuring instruments.
- Taking samples of materials, such as concrete or soil, and sending them for laboratory testing.
- Recording the results of each inspection on forms and with photographs.
- Issuing non-conformity reports and checking afterwards that the correction was done properly.
- Taking part in the final handover of the works and in the review of outstanding items.
Subjects and content usually covered
- Reading and interpreting architectural, structural and services drawings.
- Construction materials: concrete, steel, masonry, timber and their basic tests.
- Construction processes: foundations, structures, bricklaying and masonry, finishes and installations.
- Quality management systems and the quality standards that apply to construction.
- Metrology and measuring instruments: tapes, levels, total stations and testing equipment.
- Safety and health on construction sites.
- Writing technical reports and using spreadsheets.
Usual duration and type of training
There is no single length, because people reach this job by several routes. A technical or vocational program in construction, civil works or quality usually lasts 2 to 3 years, and a university degree in civil engineering, architecture or similar fields takes 4 to 6 years. It is also common to build up experience on site and add short courses in inspection, materials testing or quality systems, lasting from a few weeks to 12 months. The length and the names of the qualifications vary by country.
How you get there and what is usually required to practice
People get there by several routes: from a technical or university program in construction, or from the site itself, starting as a helper, surveying assistant, lab technician or supervision assistant and taking on inspection tasks as they gain experience. Many companies value having seen up close how the work is carried out.
In general there is no single license to work as an inspector, but in many countries certain inspections, such as those of welding, non-destructive testing or structures, require personal certifications or the signature of a qualified, registered professional. The requirements depend on the country, the type of project and what the contract demands. The first job is usually the hardest to get, and people often start as an assistant to a more experienced inspector.
Skills that help
- Observing closely to notice a measurement out of tolerance or a defective finish.
- Reading plans and specifications and comparing them with what is actually on site.
- Using measuring instruments accurately and recording data without mistakes.
- Writing clear reports, with photos and descriptions that someone else can understand.
- Explaining a rejection or a correction to work crews and managers with technical arguments and good manners.
- Keeping their own judgment when there is pressure to move faster.
Career paths and job opportunities
- Construction companies building offices, housing and infrastructure.
- Supervision or construction management firms that review work on behalf of the client.
- Materials testing and quality control laboratories.
- Manufacturers of construction products, such as precast elements, steel structures or ready-mixed concrete.
- Public bodies that commission and accept construction works.
- Industrial, energy or mining projects with strict quality requirements.
What you are not always told
- Much of the work is outdoors, with sun, rain, dust, noise, ladders and heights, and the site safety rules have to be followed.
- Saying that something does not comply can create tension with the people who did the work or with those in a hurry to hand it over, and the inspector has to hold the position respectfully.
- Hours follow those of the site: sometimes the day starts very early or inspections happen outside normal hours, for example during a concrete pour.
- A large part of the job is paperwork: forms, records and follow-up, which matter as much as the checking on site.
- The first job is usually the hardest to get, because some previous experience is often asked for.
How the field is changing
Paper forms are giving way to apps on tablets or phones, with photos and location attached to each inspection. Drones, laser scanners and digital models of the project are used more and more to compare what has been built with what was designed. Sensors and more automatic testing equipment change the way data is collected, but visual checking and technical judgment on site are still needed. There are also more requirements for documentation, for tracing materials and for environmental criteria.
Want to know if this is the right career for you?
Take the free vocational test with 5 scientific methods — CHASIDE, Holland, Big Five, MMMG and VAK — to get your personalized profile. You can also explore all university careers or learn about the scientific methodology.