What is the job of a Turnaround Shutdown Planner?
The job of a turnaround shutdown planner consists of preparing and organizing the periods when an industrial facility, such as a refinery, a chemical plant, a power station or a paper mill, stops production on a set schedule so it can be inspected, repaired and have its equipment renewed. Because that equipment cannot be worked on while the plant is running, the shutdown packs into a few weeks work that would otherwise be impossible. The person who plans defines what is done, in what order, with which people and materials, and in how much time.
A typical day is split between the office and the plant. The lists of jobs proposed by maintenance and operations are reviewed, the schedule is adjusted in planning software, parts and special equipment are checked to make sure they arrive on time, and the planner talks with contractors, supervisors and the safety department. Once the shutdown is under way, the day includes progress meetings, last-minute changes because an unexpected fault was found, and constant updating of the plan.
Typical tasks
- Gathering and sorting the list of jobs to be done during the shutdown, with their scope and justification.
- Building the detailed schedule, showing which tasks depend on others and which can be done at the same time.
- Estimating the work hours, the staff and the support equipment each activity needs, such as scaffolding, cranes or special tools.
- Coordinating with purchasing and the storeroom so that materials and spare parts are available before the start.
- Preparing the shutdown budget and tracking spending against what was planned.
- Identifying safety and delay risks together with the safety department, and defining how they will be handled.
- Following progress during the shutdown, reporting to management and replanning when surprises come up.
Subjects and content usually covered
- Basic industrial processes: how a plant's equipment works, such as pumps, heat exchangers, piping and pressure vessels.
- Industrial maintenance: types of maintenance, inspections and reading work orders.
- Project planning and scheduling, including the critical path and the assignment of resources.
- Cost estimating and budget control.
- Industrial safety and risk analysis, including work permits.
- Contract and contractor management.
- Use of project planning software and spreadsheets.
Usual duration and type of training
There is no single training for this job, so the length depends on the route. An engineering degree (mechanical, chemical, industrial, among others) usually takes 4 to 6 years depending on the country, and technical training in maintenance or industrial processes takes 2 to 3 years. After that, several years of experience in maintenance, operations or projects are usually needed before planning a full shutdown, and sometimes short planning courses lasting a few weeks or months. All of this varies by country.
How you get there and what is usually required to practice
This is a job reached by several paths. Many people come from an engineering degree, especially mechanical, chemical, industrial or process engineering, and start as assistants in planning, maintenance or projects. Others arrive from technical training and years of experience in a plant, as a maintenance technician, inspector or supervisor, and move into planning because they know the equipment well.
In general no professional license of its own is required for this position, although in some countries the engineering title is regulated. Safety courses are almost always required to enter industrial facilities and, in large companies, knowledge of project planning software. English often helps because much of the documentation and many of the contractors are international.
Skills that help
- Putting a large set of tasks into a logical sequence, working out what depends on what.
- Reading drawings, equipment lists and work orders to understand what each job involves.
- Estimating times and costs with the information available and correcting them when the data changes.
- Explaining the plan clearly to people from different trades and departments, and listening to their objections.
- Negotiating deadlines and scope with contractors, operations and maintenance.
- Adjusting the plan quickly when a problem appears, without losing sight of safety.
Career paths and job opportunities
- Oil refineries and petrochemical plants.
- Chemical, fertilizer and gas plants.
- Power generation stations.
- Mining and mineral processing plants.
- Paper, cement, steel and food industries.
- Contractor and consulting firms that offer shutdown planning services.
What you are not always told
- The shutdown is an intense period: for weeks people may work long shifts, by day and by night, with little room for days off.
- Much of the earlier work is quiet office work, with months of preparation that is only noticed when the shutdown goes well.
- Every hour of shutdown costs the company a lot, so the pressure to meet deadlines is constant.
- Unplanned jobs always turn up once equipment is opened, and the plan is almost never carried out exactly as written.
- The work involves travel or time in remote industrial areas, and first positions are usually support roles before leading a shutdown.
How the field is changing
Planning and cost-control software is increasingly linked with maintenance systems, which reduces the manual work of building lists and reports. Three-dimensional models of the plant, drones and sensors are used to inspect equipment and define the scope better before shutting down. Data from earlier shutdowns is also analyzed to estimate times better and spot patterns of delay. At the same time, safety and environmental rules ask for more documentation and control, which adds recording and checking tasks.
Want to know if this is the right career for you?
Take the free vocational test with 5 scientific methods — CHASIDE, Holland, Big Five, MMMG and VAK — to get your personalized profile. You can also explore all university careers or learn about the scientific methodology.